TANK007 police security led rechargeable flashlight uses and precautions

TANK007 police security led rechargeable flashlight uses and precautions:

1. Recharge the battery installation and unscrew the led flashlight tail cover, pay attention to the positive and negative poles of the battery, put the battery into it, and screw the tail cover of the flashlight.

2. When the police flashlight is turned off, press the middle switch, the flashlight is turned on, and the above steps are repeated.

3. Press the flashlight switch light to light low light during normal use. Need to switch the light, you can switch the light mode by tapping the switch. The police flashlight mode is weak light, strong light, and flashing. Press the switch again to turn off the flashlight.

How to charge TANK007 police led flashlight:

1 Unscrew the tail cover of the police flashlight and remove the battery.

2 Put the battery into the special charging box (Note: When inserting the battery, the positive and negative terminals of the battery must be positive and negative, otherwise it will not be charged).

3Remove the charger. Insert the two pins into the power take-off interface and insert the jack end into the battery box jack. When charging, the light on the charger is red. When the indicator changes from red to green, the charging is completed. At this time, the battery can be taken out for use.

TANK007 police security led flashlight humanized design, using bare waterproof direct charge, can be quickly charged, without removing the flashlight, direct charging, easy to use.

Police led flashlight use precautions

1. Don’t shoot the light from the flashlight directly into the human eye. Strong light will cause permanent damage to the eyes.

2. The lamp cap must not be disassembled to avoid damage to the reflector or bulb. Will also affect the waterproof performance of the flashlight

3. When the bulb can’t maintain high brightness, please replace the battery when charging, to avoid damage to the battery caused by over-discharge.

TANK007 flashlight is suitable for families, night riding, camping, high-end car gifts, adventure, military training, border defense, land and sea search, emergency rescue, criminal investigation, site survey, biological detection, jade identification, jewelry identification, anti-counterfeiting identification and other places. . It has won the trust and support of a large number of European and American customers and the Chinese Ministry of Public Security, and has become a stable supplier of such customers in the continuous good cooperation. Tank007led flashlight has long been loved by consumers.

https://www.tank007.com/product-category/rechargeable-flashlight/

The application of UV led flashlight detection PCB circuit board and three anti-paint coating effects

The application of TANK007 UV flashlight in the detection of PCB circuit board and three anti-paint coating effects.

Three anti-paint coating: PCB circuit board three anti-paint operation is simple: shake the three anti-paint before use, brush the liquid, spray it on the surface of the circuit board or immerse the whole circuit board in the liquid and then dry it. TANK007 UV flashlight UV detection circuit board, easy to apply;

PCB circuit board three anti-paint is a one-component low viscosity silicone resin, composed of resin, and waterproof additives, with hydrophobic moisture, radiation, high transparency, non-toxic, non-polluting, high and low temperature resistance (-60-200 degrees Celsius) ), anti-aging, weather resistance and other advantages. It has excellent electrical insulation properties and its high frequency electrical properties are good.

The three anti-paints are air-dried at room temperature for 1 to 3 minutes and are closely attached to the surface of the circuit board. The properties are stable after 24 hours; the temperature is constant under normal temperature and pressure. The circuit board treated with three anti-paints is placed in water for 24 hours. After being taken out and air-dried, the circuit board and electronic components are free from any corrosion and the performance is unchanged. The high-quality three-proof paint is resistant to -60~+200 degrees Celsius and low temperature, and is resistant to 20000. Volt high pressure

Application of three anti-paint: It is typically used in assembled circuit boards to protect the wire boards from harsh environmental impacts such as various chemicals, moisture, dust and high and low temperatures. Such as: hybrid integrated circuits, automotive electronic control panels, electronic circuit boards, aviation dashboards, flexible printed circuits, microcomputer control boards, semiconductor crystal line protection, home appliance control systems, electrical accessories, transformers, coils, etc.

The figure below shows the effect of a three-coat-coated circuit board under visible light. The three anti-paint is a transparent glue, which can be directly observed by the naked eye. It is impossible to tell whether the circuit board is evenly covered!

The following picture shows the effect of the waterproof coated circuit board under the ultraviolet light of ultraviolet flashlight: under the illumination of TANKk007 UV flashlight, the waterproof rubber coating on the circuit board is clearly visible, and no waterproof glue is clearly visible in some places.

Features of TANK007 UV led Flashlight:

1. The imported aluminum mirror is used to optimize the ultraviolet radiation.

2 high-strength aluminum alloy oxidation shell.

https://www.tank007.com/

How to make a rechargeable led flashlight steps

The role of the rechargeable LED flashlight is very large, whether it is in the wild camping, or in the home and travel it can bring great convenience. Today, TANK007 wants to introduce you how to use diy flashlight parts to make a rechargeable led flashlight steps, and with a detailed flashlight productions pictures. Friends who are interested in making a led flashlight and love DIY LED flashlight production can also try it at home.

Preparation tools and diy flashlight parts before making a rechargeable LED flashlight:

Before making a rechargeable led flashlight, you first need to prepare the tools you need during the flashlight production process, including electric welding, electric soldering iron, rosin, solder, tweezers, etc. In addition, the diy flashlight parts required in the LED flashlight production project must also be prepared in advance, including the flashlight casing, led lights, circuit boards, thermal silica gel, rechargeable batteries and so on. Once you have prepared these diy flashlight parts and tools, you can start making rechargeable led flashlight.

The flashlight soldering tools are as follows:

Flashlight making tools and the diy flashlight parts need to be selected according to your needs

The following rechargeable led flashlight production requires parts as a reference:

Led flashlight detailed production steps:

step 1: take out the circuit compartment of the flashlight, and then pass the two leads of the wire through the small holes. There are some circuit compartments that vary in size from the flashlight’s circuit size, and we need to make the appropriate modifications.

step 2: it is necessary to apply thermal silica gel on the circuit compartment of the flashlight, and then put the rechargeable flashlight led lamp beads on, and then you can carry out the corresponding welding production work. Pay attention to the direction of the positive and negative electrodes when soldering the led flashlight. Never solder it wrong.

step 3: after the rechargeable led flashlight welding is completed, a simple power-on test is required. If everything is normal, the led flashlight can be normally lit, and we are inside the flashlight case.

step 4: after the led flashlight circuit compartment is installed, if you use a metal light cup, you need to put an insulating sheet on the led. Finally, install some flashlight parts and tighten them.

TANK007’s PT10 rechargeable led flashlight adopts diy lamp head design, the flashlight head can be disassembled at will, the light cup and lamp bead and the circuit compartment can be replaced. DIY making charging led flashlight is more flexible and simpler.

The above is the production steps of rechargeable led flashlight, not very complicated, friends who like DIY flashlight production, you can try it, of course, you can also directly purchase DIY freely assembled flashlight for modification. If you don’t feel comfortable making the effect, it is recommended to buy an assembleable flashlight. You can visit the TANK007 website and buy your favorite flashlight.https://www.tank007.com/

The basic performance of the TANK007 rechargeable police led flashlight

The police military grade flashlight is one of the important military police and law enforcement personnel equipment. The front of the police security flashlight has a lotus attack head, which can play the role of attacking the painful uniform. The flashlight function of strobe can also cause the gangster to temporarily lose sight and stun in a short time for self defense. The police led flashlight using durable aircraft-grade aluminum T6061 material, and the police security flashlight has the functions of waterproof, explosion-proof, shock-proof and pressure-resistant,etc.

The application of TANK007 police security flashlight includes: close-range inspection, patrol search, assault capture, law enforcement, and can also be used for self defense flashlight. TANK007 police led flashlights are widely used in nighttime duty, construction, maintenance, and repair field operations in factories, mines, electric power, transportation, water conservancy, urban construction, petrochemical, public security, fire protection, and military.

The basic performance characteristics of the TANK007 police rechargeable led flashlight:

1. Police flashlight lightweight and high-hardness durable aircraft-grade aluminum T6061, the shell can withstand strong collision and impact, special sealing structure design, waterproof and dustproof, anti-fall and explosion-proof performances, can meet various harsh environments and climatic conditions The work needs.

2. The police security flashlight uses a new high power CREE LED light source, which is efficient and long-lived, low in energy consumption and has long distance of more than 300 meters.

3, the police led flashlight optimized circuit design has battery over-discharge protection, constant current and constant voltage function; no longer appear when the battery power drops, the brightness is also reduced, the smart charger is equipped with overcharge protection and charging display device.

4. The police flashlight uses 18650 Li-ion rechargeable battery, which has good charge and discharge performance, high capacity, low self-discharge rate, economical and environmental protection. Once fully charged, continuous use of strong light for more than 3 hours, glare, working light, strobe, SOS Five low light models.

5, TANK007 police led flashlight has a beautiful appearance, compact structure and light weight. It can be hand-held or hung on the belt, which is convenient to carry and use.

https://www.tank007.com/product-category/rechargeable-flashlight/

Mini led flashlight manufacturer processing the characteristics and advantages

There are many mini flashlight manufacturers in the world, but there are not all flashlight company with real strength. Most mini led flashlight manufacturers produce led flashlights. Like the Chinese flashlight manufacturer, it produces high quality led flashlight products. For example, TANK007 brand’s flashlight manufacturer.What are the characteristics and advantages of mini led flashlight production?

The appearance of the old fashioned flashlight and the mini Led flashlight are similar, but the design of the TANK007 flashlight is different. After the LED flashlight structure is designed, it can be used in some special-purpose places. This is the difference in quality between high-quality flashlight manufacturers. Then how do we look for quality flashlight manufacturers products, the following small series detailed explanation.
　　Mini led flashlight manufacturer processing the characteristics and advantages

1. The mini flashlight switch is different. small led flashlight is turned on with the rotation of the head, and the rotation can be continuously turned on. Even if the switch is turned on and the tail is pressed, no spark will appear.

2. The strong outer casing of the mini led flashlight makes it resistant to impact, corrosion, high temperature and low temperature, light weight, and the hand feels not cold or slippery. Ordinary LED flashlight housing is made of plastic and other materials, not too strong.

3. The small torch light is tightly sealed and has excellent waterproof performance characteristics and advantages. Due to the use of O-rings and in the dehumidification process, ordinary plastic LED flashlights are not waterproof and cannot be operated underwater.

4. The mini led flashlight shell is made of flame retardant material and will not produce Mars due to collision. Ordinary LED flashlights are damaged when burned. Different ordinary flashlights and high-quality small led flashlights can be judged from the above points.
　　The flashlight brand of Shenzhen Grandoor Electronic Co., Limited. TANK007 flashlight is dedicated to the research, development, design, production and sales of flashlights or special-purpose led flashlights for powerful flashlights, led flashlights, miniature explosion-proof flashlights, LED flashlights, etc. With strong manufacturing capabilities and advanced production design, it is a large flashlight production base in China, and its products are exported to the United States, Europe and other places.

https://www.tank007.com/product-category/mini-flashlight/

Best aaa pocket mini led flashlight keychain custom with cheap price

As the technology of led lamp beads has gradually matured, most of the pocket mini keychain flashlight currently used are led. In the led flashlight market, there are mainly two kinds of lighting flashlights: one is led flashlight lighting, which can also be used for home lighting and outdoor lighting; and the other is aaa pocket mini flashlight (EDC torch light).Pocket mini torch light pursuit The mini is compact and easy to carry, used in emergency lighting.You can choose led flashlight manufacturer custom aaa mini flashlight with cheap price.

The EDC pocket mini flashlight described below belongs to the latter, and the weight of this small torch light is only 10g. What is the concept, which is equivalent to the weight of two one-dollar coins. You don’t have to doubt that such a small led flashlight.The distance of 80 meters or more, you may not believe it, but this is the fact. Let’s take a look at the mini keychain flashlight from the parameter point of view.

First look at the mini led torch appearance, small body, with a CREE, high-brightness led lamp beads, brightness up to 120 lumens. Use a high-quality T6061 aerospace-grade aluminum flashlight body, the small torch light is well protected. Resistance to falling and waterproofing are inherent characteristics. AAA battery is enough to make it last more than 1 hour of lighting. Especially small, such as the usual small clips; if you camp, go out, it is very convenient to hang it on the bag.

The mini led keychain flashlight switch is at your fingertips, the head switch is designed, and the rotation is on. Easily switch flashlight switches for a more convenient using experience

80 meters long-range shot is the highlight of this mini keychain flashlight design with only 10g weight. For the best brightness and lighting effect, imported CREE lamp beads are used as the light source. Secondly, in order to better reflect the light source, this mini led flashlight The high-temperature vacuum plating mirror aluminum alloy reflector design is adopted. The dimming was repeated by professional flashlight engineers. It has a long-range distance of 80 meters.custom best aaa pocket mini keychain flashlight.

OEM/ODM Mini flashlights(https://www.tank007.com/product-category/mini-flashlight/)

How to use scorpion uv flashlight for hunting

TANK007 UV flashlight can be used not only for banknotes, testing equipment, but also for detecting crude oil leaks. How to use scorpion uv flashlight for hunting?What is the principle of capturing a scorpion with an ultraviolet flashlight?

Scorpion is a poisonous small animal that exhibits transparency due to its UV light. Any adult scorpion species will appear yellow-green or blue under ultraviolet light.

In 1954, scientists used ultraviolet light to better study or capture them in the habitat of the night without irritating the scorpion.

There is a layer of sulfide on the outer shell of the scorpion, which belongs to photoluminescence. The ultraviolet light emitted by the uv flashlight reacts with this layer of sulphide and then reacts with fluorescence. Therefore, you can bring a uv flashlight at night for hunting scorpion.

The scorpion generally likes a slightly damp earth wall or a gathering under the rock. It usually appears at night. It is easy to see the scorpion in the cracks of the old house wall. When the TANK007 UV flashlight shines on the scorpion, the following scene will appear. The scorpion glows all over the body, and you can clearly distinguish it from anything around you. So it’s very convenient for hunting by scorpion uv flashlight.

The following picture is the effect of the scorpions illuminated by the TANK007 uv flashlight:

How to use scorpion uv flashlight for hunting?You can choose TANK007 365nm uv flashlight,Because the 365nm UV flashlight is better for hunting scorpions at night.

How to choose and purchase a best mini led flashlight

Although the mobile phone now has its own flashlight function, at night, when the home is out of power or going out, the mobile phone can not always turn on the mini torch light, which is too power-consuming, and is not good for the mobile phone itself. At this time, the mini torch light is useful. It is. So how do you choose and buy a best mini flashlight? mini torch light purchase strategy? To choose a good mini flashlight, first choose from the material and performance of the mini torch light. Finally, the mini flashlight brand is also very important!

With the development of mini led flashlight technology, the small led flashlight has the characteristics of long life, reliable and durable, and extremely low maintenance cost. The constant voltage drive ensures the consistency of the brightness of the LED flashlight, ensuring the reliability, life and light decay of the mini torch light. The use of low-cost, high-reliability drive circuit is the key to ensure long-lasting brightness of the mini flashlight, so we need to pay attention to the following points when choose and buy a best mini led torch light.

Mini Flashlight material

To choose a good mini torch light, you must first look at the mini torch light material. The plastic material of the flashlight barrel is not durable. The stainless steel is strong and durable. However, stainless steel is easily oxidized after long-term use, which causes the problem that the flashlight cannot be used normally. Therefore, we recommend that you choose and buy a mini torch light made of durable aircraft-grade aluminum T6061.

Mini flashlight lens material

mini torch light is best to use high-strength optical glass or polycarbonate material, which not only has good permeability, but also is resistant to shock and wear. Do not choose ordinary glass or plexiglass for the lens material. The ordinary glass is fragile and the plexiglass is not wearable.

Mini flashlight reflector material

First of all, it must be made of metal. Because the metal’s high temperature resistance is better. In addition, in order to ensure the reflective performance is more secure, to observe the smoothness of the reflector, do not buy scratches and spots on the surface of the small led torch light.

Flashlight production process

First of all, the mini flashlight should be regular, meticulous, and work well. There are no solder joints and gaps, which is essential for ensuring the moisture resistance of the mini torch light. Secondly, the body of the mini led flashlight must have anti-slip embossing, and the process should be studied. The third is that there should be a sealing ring at the junction between the lamp cap and the mini torch light body. Of course, this is also considered to be moisture-proof.

Mini torch light source

The most common sources of flashlights are bulbs and LEDs. The mini led flashlight can be selected from the LED light source. The advantage of the LED is that it is small in size, power-saving, long in service life, and does not emit too much heat to produce a “hot” phenomenon.

Mini led flashlight brightness

If you carry a pocket mini torch light, a 1W mini led flashlight is enough.,that using AA batteries or AAA batteries.mini torch light is easy to carry and use. The current at the LED terminals is generally below 300MA, and the power is below 1W.

Mini flashlight price

Because you choose a locket small led flashlight, the price does not have to be too high, you may often use small torch light in everywhere, you can look at TANK007 mini led flashlights.You can choose and buy a best mini torch light form TANK007.

https://www.tank007.com/product-category/mini-flashlight/

Why use 365nm UV flashlight for fluorescent leak detection

Special UV flashlights tailored to the fluorescent leak detection industry! The 365nm UV Flashlight is a convenient leak detection tool for the fluorescent leak detection industry. Ultraviolet flashlights overcome the shortcomings of the market, it is bright, no need to wait, large areas of high-intensity ultraviolet light, small funnel-shaped, easy to find.

365nm UV torch uses ultraviolet light, purple light source, blue light, white light source, so why choose ultraviolet light source? Because ultraviolet light is invisible to the naked eye, visible light such as violet, blue, and white light have fluorescence that interferes with the leak detector. Wearing yellow fluorescent-enhanced glasses is necessary, even if it causes leak detection. So choosing a fluorescent leak detection torch (UV flashlight) 365 nm uv light source as a UV flashlight will reveal a small leak.

The tank007 UV flashlight uses a high power 365nm uv LED flashlight as the light source, which sends a strong UV light, making it easy to find leaks.

Therefore, many people are worried that ultraviolet rays will damage operators. In fact, the news often reports that UV damage is short-wave UV disinfection lamp.short-wave UV has a strong damage to human skin, tank007 UV flashlight uses a narrow-spectrum medium-wave ultraviolet (UV) light source, no harmful short-wave and medium-wave UV. Remember to operate the tank007 purple flashlight and wear UV-resistant glasses.

Mostly we also use oil-soluble fluorescent to check the leaking, in a simple way.Soluble fluorescent can be used in any closed loop system, except for fuel system, lubrication system, hydraulic system, including turbo power system, pneumatic system, industrial piping and all kinds of industrial valves, interface leak. 365nm ultraviolet led flashlight is are widely used in many fileds.

https://www.tank007.com/product-category/uv-flashlight/

How to choose a best Gift small led flashlight manufacturer custom

Gift small led flashlights are very common in people’s lives. Although they are small, they are very useful. We can see that at present, the small led flashlight is becoming a very popular small gift, which can be seen in both business gifts and event promotions. The demand for gift small torch light is gradually increasing. At the same time,pocket gift small flashlight manufacturers are constantly developing and innovating to meet this new market demand.

We can find that there are many manufacturers of gift small led flashlights on the market. Among these many mini flashlight manufacturers, Shenzhen Grandoor Electronic Co., Limited led flashlight manufacturer is a very professional one. If you need to order gift small led torch light, you can Different needs to customize the mini led flashlight you need.

Shenzhen Grandoor Electronic Co., Limited led flashlight manufacturers have the following advantages:

First of all, experienced and strong technical strength. Founded in 2000, Shenzhen Grandoor Electronic Co., Limited is an entity integrating R&D, design,flashlights manufacturing and sales services. The company has self-built 5,000 square meters factory, with CNC lathe, computer boring, five-axis machine, anodizing, finished product assembly, etc., with exquisite workmanship and strong hardware strength. There are also many professional led flashlight production lines, standardized production and testing, integrating research and development, production and sales, eliminating the need for intermediate links to effectively control the large inventory of regular products, and place orders on the same day.

Shipped on the same day, customized service, delivery within 7 days.

In addition, the quality of flashlight products is guaranteed. The brand TANK007 flashlight raw materials are all first-class raw materials and stable and reliable brand suppliers (such as LEDs from the world’s top brands: the United States CREE, Germany OSRAM, Japan’s UV chips, etc.), all key components are independently designed and processed In order to ensure the quality and reliability of led flashlights, the whole series of flashlight products have passed the CE, ROHS and other authoritative quality certifications. The flashlight performance parameters are higher than the national military standards, with high market position and good reputation and customer praise.

In fact, the custom work of gift small led flashlights is not as complicated as we think. When we are customizing, we must first consider what materials we need to use, what kind of functionality is required for flashlights, and what kind of colors we like. Whether you need to add a proprietary logo to the flashlight, etc., just consider these clearly, and then submit these requirements to the gift flashlight manufacturer, it is very time-saving.
https://www.tank007.com/gift-small-led-flashlight-manufacturer-custom/

The best TANK007 E09 Small Mini led Flashlight review

yesterday I received from tank007 this little tip of the mini flashlight was sent to me the next day after the order and 10 days later it was in my arms.
I decided to write a short review on this model of the tank007 E09, as interest to it on the forum, in connection with the group purchase, significantly increased.



but now I'll go directly to the topic.I'll start with the fact that the flashlight is sold in a good metal gift box - a box.

in the box I found the flashlight itself, a spare silicone ring and a double ring with a keychain for convenient fastening of the flashlight to the keys.

immediately noticeable is the small size and good quality of the pinnacle. the length of the flashlight is only 7 centimeters.(next to compare tank007 TK-701)

compared with next to the other flashlight

black anodizing is similar to the third degree, performed very well without the slightest flaws or chips.
I unscrew the head of the flashlight. The carving - qualitative, anodized and long - was greased.

From the inside of the head part you can see the firm driver, which has three convenient light modes with memory.

memory works well - it takes 3 seconds to glow any mode for its operation. I want to note that the flashlight is a real flexible.
Now I twist the upper part of the head, and it is dismantled into two parts, and I get to the diode and the reflector. diode, as it was stated CREE XP-E.

the reflector is aluminum, shallow and smooth allows the flashlight to give a beam with wide side light and a large pronounced hotspot
the flashlight can be easily turned on with one hand by turning the head, which is moderately easy to rotate and has a comfortable notch and edges.
a few words I will say how it shines, because we all buy it for this.

it shines well: a very bright maximum mode, a comfortable medium and a really weak small mode.
I did some of my measurements. The accuracy of the measurements is relative, but the overall picture of the light characteristics will give.

lumens
AAA 1.2v
HI-73
MID - 23
LOW - 0.7

and now a suite with 1 meter:

AAA 1.2v
HI - 518 lux
MID - 165 lux
LOW - 12 lux

measured the current consumption from the battery eneloop 1.2v

HI = 1.75A
MID - 0.50A
LOW - 0.04A

in general, I really liked the flashlight. it is executed qualitatively, with good anodizing, very bright and simultaneously small, with practical modes and the money it costs unequivocally.

https://www.tank007.com/product-category/mini-flashlight/

what is effect of 365nm uv flashlight applications?

UV light is an invisible light, because it exists outside the ultraviolet light in the spectrum, so it is called UV rays. According to the spectrum, long ultraviolet light wavelength is between 320nm to 400nm. The centre number is 365nm. UV light with this wavelength is used in many fields such as fluid system leak checking, oil spots detection, industry glue solidification, fluorescent detection, criminal investigation, medical treatment, etc.

How UV Light Works?

a, Oil substances shine fluorescent under UV light, therefore, 365nm UV flashlight can check grease, oil dirt.

b, many ore will fluoresce under ultraviolet light, emit a different fluorescent under ultraviolet radiation of different wavelengths, while at the same ultraviolet irradiation, ores contain different chemical compositions fluoresce different. Therefore, UV detection has become an important method to indentify materials in the ores.

c, Maintenance personnel use them to identify invisible cracks --- by injecting a small amount of fluorescent dye into the fluid system, running for 15 minutes then exposing to ultraviolet light, the they can easily find the leakage spots.

d, verifiers use them to detect the authenticity of antiques. There are many pigments containing phosphorus, which glows under ultraviolet light, but most old paints do not containing phosphorus.

e, Forensic scientists use ultraviolet light to analyze the crime scene. To get fingerprints, for example, they usually sprinkled fluorescent dye under ultraviolet light. So that they it can more easily see fingerprints.

f, By shining the fluorescent in the seal to see whether the confidential files are opened

https://www.tank007.com/product-category/uv-flashlight/

Tank007 E09 world’s smallest gift mini led flashlight features

Speaking of the mini flashlight, if you still think of the old light bulb flashlight, then the flashlight of the previous home is wrong. Now the flashlight can do very well. Tank007 is a 17-year flashlight manufacturer and witnessed it. Modern led flashlights from scratch, from the process to the fine. The development of flashlights has become more and more detailed. There are flashlights for outdoor use, flashlights for jade, gift mini flashlights, identification flashlights, criminal detectives, etc. The more powerful it is. Today I will introduce you to the super mini flashlight tank e09.

How long is the led flashlight? 25 cm? 20 cm? These mini flashlights are available, but have you seen a mini flashlight with only 7 cm? Then you will see the world’s smallest mini flashlight today – tank007 e09 mini flashlight .

1.Tank007 E09 mini flashlight is the main gift of Tank007 R & D, mini flashlight, E09 mini flashlight design is short and exquisite, with keychain can be hung on the keychain, making it more convenient for you to take a flashlight.

2, as the material of tank007 mini flashlight, aviation aluminum alloy is essential, tank007 e09 mini led flashlight is made of aviation-grade aluminum alloy material, with ultra-light weight and super-sturdy appearance.

3, as a portable mini flashlight, must have a strong endurance is also essential, tank007 e09 circuit using tank007 patented design circuit, in addition to stability, constant brightness, the biggest feature is power saving, An ordinary AAA battery can last up to 18 hours.

4, e09 mini led flashlight is waterproof design, in order to ensure the overall sealing, abandon the traditional physical switch, using a reliable head rotation to control the battery touch switch to control the flashlight switch. You can control the three brightness modes through the head rotation force, so that you can cope with it in different complex environments.

After reading these introductions, would you be surprised by the design of this mini flashlight? If you like, please contact us to buy it.

Portable Mini LED Flashlight Features and Precautions

Portable mini LED flashlight is a high-brightness LED flashlight with LED as the light source. It has the advantages of power saving, waterproof, anti-corrosion, explosion-proof, anti-fall, durable and strong brightness. In fact, the portable mini-charged led light flashlight can not be called a household appliance, but it is still a must-have product for many families. Whether used indoors or outdoors, the use is more extensive.

TANK007 portable mini LED flashlight design highlights:

The portable mini led flashlight is very clever in design. The flashlight is also very convenient when charging. It is convenient for users to use. The flashlight also provides a switch, with flashlight, constant light and SOS. Help flashing three light modes, which can be switched by the switch. Very human. It is also very convenient when charging.

LED flashlight is a new type of lighting tool with LED as the light source. It has the advantages of waterproof, dustproof, durable and strong brightness. Please pay attention to the following points when purchasing a portable mini LED flashlight:
1. Focus on the spot of the electric beads as much as possible. This kind of flashlight does not adjust the focal length like a normal flashlight. When purchasing, be careful not to have astigmatism.
2. The power switch contact should be obvious. This type of flashlight uses a rotary switch, which is turned on and then turned off. If the contact is not obvious, it is easy to cause the phenomenon of light up and off.
3. The number of heads is moderate. Generally, the household should not exceed 12 heads. The battery used is 2 to 3 knots. It is a little bit bigger. For other special needs, you can determine it according to your needs.
4. Welding must be strong. Each diode is connected to the circuit board by soldering. If there is a bad solder contact, it may cause the bead to be off or affect the overall use.
5. Waterproof and dustproof. Although it is an electronic product, TANK007's portable mini LED flashlight is fully sealed and designed to work in heavy rain, waterproof and dustproof, high temperature resistance, high humidity performance, and can be used under various environmental conditions.
TANK007 flashlight is suitable for families, night riding, camping, high-end car gifts, adventure, military training, border defense, land and sea search, rescue, criminal investigation, site survey, biological detection, jade identification, jewelry identification, anti-counterfeiting identification and other places. . And won the trust and support of a large number of customers, and also become a stable supplier of such customers in the continuous good cooperation. For a long time, Tank007led flashlight has been loved by consumers. Now it is engaged in investment promotion, distribution joining, flashlight manufacturers wholesale. Website: https://www.tank007.com/
Mini led flashlight, portable led flashlight, led flashlight, mini flashlight

Do you still remember the classic cree q5 r5 t6 series lamp beads?

As the years passed, we witnessed the step-by-step development of cree. Now, who can still remember the first time when I got the q5 led flashlight, the feeling of white light is infinite!

At that time, the first time I got the flashlight of this lamp, I felt that it was a great joy. For those who used the yellow light flashlight, the first time I saw a flashlight that could emit white light, I felt that it was Rare! What's even more amazing is that this is like a sesame-sized yellow square, which can make such a dazzling white light, that is, sigh and curiosity!

Later, after learning from Google, I realized that this was originally a high-power LED. The light-emitting diodes used for the indicator light were used for the first time. The first time I saw the LEDs that can be used in the illumination, and the high intensity. Very concentrated, completely subverting the previous understanding of LEDs! Since then, I have been out of control, and I feel that Cree is amazing!

Do you still remember the lamp bead in the picture below, when a lamp with a price of $3 is used, a large-area ceramic base, a pure copper tin-plated core protection lens copper ring base, and high temperature are not melted and deteriorated. A lens made of high permeability resin! Even under the illuminating core, used to protect the core, straight through the 4.2v lithium battery does not burn, rectangular substrate protection chip! That's right. This is the most used lamp for countless brands/DIY/cottage flashlights in the past.

The classic lamp beads in CREE classics, XRE-Q5 lamp beads. Its 3 watt power is now out of date! But at the time, let us experience the thrill of a white light flashlight, so until now we clearly remember that its model XRE / optical pass 220LM / power 3W / voltage 3.3-3.5v / current 1A and early 5 gear dimming 1A current Drive circuit 7135*3! In the later stage of this lamp, the core Q5/R2 is also derived.

The picture below is a small core Q5. The large core R2 covers the bottom of the bottom mos and does not see the core red border!

This lamp bead is definitely rare. It is the first generation of CREE lamp beads. It is a single-line XRE P4 lamp bead earlier than q5. The lamp bead is 3 vertical cores smaller than Q5, and the actual power is 1-1.5w! This uses is not as good as Q5, but the core is smaller than Q5 so the long-range capability is stronger! Therefore, some flashlight enthusiasts love this lamp bead!
https://www.tank007.com/